AVENTICS機械式調壓閥功能，REXROTH調壓閥
材料:
壓力露點必須少低于環境和介質溫度15 °C，并且允許 的zui高溫度為 3 °C。
適用于在 1、2、21、22 Ex 區內使用
Neutral gas
Medium temperature range -10 ° C / + 60 ° C
Recommended primary filter: 5 μm
Shell die-cast zinc
Positive Panel Acrylonitrile Synthetic Material
Sealed acrylic gum
調節器型號 隔膜式調壓閥, 可以組裝成塊
調整功能 帶二次排氣

AVENTICS機械式調壓閥功能，REXROTH調壓閥
調節范圍 zui小/zui大 見下表
Adjustment range min / max See table below
Pressure delivery single
material:
The pressure dew point must be at least 15 ° C
below the ambient and medium temperature and
the maximum permissible temperature is 3 ° C.
For use in the 1,2,21,22 Ex area
密封  丙烯樹膠
壓力輸送 單的
建議的初過濾: 5 µm
外殼  壓鑄鋅
正面板  丙烯腈合成材料
Ambient temperature range -10 ° C / + 60 ° C
Regulator Type Diaphragm type regulator can be assembled into blocks
Adjust the function with secondary exhaust